Rims
Rims
Dimer Detergent
Mixing ratio 1:20
Exposure: 2 min
These before / after comparisons show how quickly and easily, thanks to our Dimer
cleaner, even the dirtiest rims become clean and shiny again. Here, the detergent was
simply diluted with water, in the ratio 1:15, and then the rims are sprayed with it. After 2
min exposure time
the rims are only rinsed with the high-pressure cleaner. That's it! The
use of a brush was completely renounced.
Rims
Dimer Detergent
Mixing ratio 1:20
Exposure: 2 min
This before / after comparison shows a worse example. Because this rim was not washed for several months or years, the brake dust has solid mass deposited as a yellow deposit on the alloy rim. Again, thanks to our cleaner Dimer, the rim is very easy to clean. Dilute the dimer detergent 1:20 with water. Then the rims are sprayed with the diluted cleaner. Because the pollution is strongly burned in here, it is advisable to brush the rim briefly with a dish brush. After 2 minutes of exposure, the rim can then be rinsed off with the high-pressure.
Motorcycles
Dimer Detergent
Mixing ratio 1:20
Exposure: 3 min
Here's another example. This motorcycle was not washed for over 3 years and it was standing unused in a stable. Again, therefor we work with the detergent Dimer. Dilute with water at a ratio of 1:20. Spray the motorcycle everywhere from the bottom to the top. After 3 minutes exposure, rinse with the high-pressure cleaner.
Rim cleaning
On this short clip you can see how fast and easy, thanks to our detergent Dimer, even the dirtiest
rims become clean and shiny again. Here, the detergent
is simply diluted with water, in the ratio
1:20, and then the rims are sprayed with it. After 30 seconds, the rims are only rinsed with the high-pressure cleaner. That's it! The use of a brush was completely omitted.
Removal of fat residues in the food and catering industry
On this short clip you can see how our detergent Dimer is also used in the food industry. The Dimer cleaner, when diluted, is also suitable for cleaning surfaces soiled with grease, fat or oil, as shown here in the video, of a kitchen ceiling and steam extractor in a restaurant. Dilute the detergent dimer 1:20. Spray it on the surface, or spray directly on the rough side of a sponge. Clean surface with sponge and then wipe with a damp cloth.
Chrome steel steam exhaust
Dimer Detergent
Mixing ratio 1:50
Exposure: 0.5 min
In the large-scale industry, one often has to deal with heavily burnt-in soiling and incrustations. These can usually only be removed with a laser or dry ice cleaning. Not any longer. Now you can take our detergent Dimer at hand. Dilute the cleaner Dimer with water in the ratio 1: 6. After that, the pressing tool seen in the picture, is sprayed and after a contact time of 10min rinsed with water and high-pressure cleaner.
Chromstahlwand
Dimer Detergent
Mixing ratio 1:10
Exposure: 10 min
In the large-scale industry, one often has to deal with heavily burnt-in soiling and incrustations. These can usually only be removed with a laser or dry ice cleaning. Not any longer. Now you can take our detergent Dimer at hand. Dilute the cleaner Dimer with water in the ratio 1:10. After that, the chromium steel surface, which can be seen in the picture, is sprayed and rinsed off with a high-pressure cleaner.
Chrome steel surface
Dimer Detergent
Mixing ratio 1:10
Exposure: 10 min
In the large-scale industry, one often has to deal with heavily burnt-in soiling and incrustations. These can usually only be removed with a laser or dry ice cleaning. Not any longer. Now you can take our detergent Dimer at hand. Dilute the cleaner Dimer with water in the ratio 1:10. After that, the chromium steel surface, which can be seen in the picture, is sprayed and rinsed off with a high-pressure cleaner.
Press tool for plastic parts
Dimer Detergent
Mixing ratio 1:6
Exposure: 10 min
In the large-scale industry, one often has to deal with heavily burnt-in soiling and incrustations. These can usually only be removed with a
laser or dry ice cleaning. Not any longer.
Now you can take our detergent Dimer at hand. Dilute the cleaner Dimer with water in the ratio 1: 6. After that, the pressing tool seen in the picture, is sprayed and after a contact time of 10min rinsed with water and high-pressure cleaner.
Cleaning of agrikultural and construction machinery
On this video you can see how our cleaner Dimer can effortlessly clean construction and agricultural machinery. Here, the cleaner is diluted in the ratio 1:10, applied to the machine, left to act for a short time and then simply rinse the machine with a high-pressure cleaner. All residues such as fructose will be removed without residue, without damaging the paint or the surface.
Remove adhesive residue or glue
On this short clip you can see how you effortlessly remove any type of glue residue on paints and other surfaces with our detergent Dancol. Most of these residues are caused by the application of stickers and foils on the vehicle or by the attachment of vignettes on the windshield. For this purpose, the surface must be sprayed directly with the cleaner Dancol or better spray it directly on the adhesive residue on the surface and after a short exposure time, you can wipe the surface with a cloth. That's it. Thanks to the Dancol detergent no scratching of the paint, no painful scrubbing and no time wasted.
On this short clip you can see how fast and easy, thanks to our detergent Dimer, even the dirtiest rims become clean and shiny again. Here, the detergent 1:20is simply diluted with water, in the ratio 1:20, and then the rims are sprayed with it. After 30 seconds, the rims are only rinsed with the high-pressure cleaner. That's it! The use of a brush was completely omitted.
This before-and-after comparison shows how you can easily remove insect residues from paints and other surfaces with our Netins cleaner. For this purpose, the surface to be cleaned or the insect remains briefly sprayed on the surface with the cleaner Netins and after a short exposure time (15s) you can wipe the surface with a cloth or rinse with a pressure washer. That's it. Thanks to the cleaning agent Netins no scratching of the paint, no painstaking scrubbing and no time disappear.
Car transmission
Dimer Detergent
Mixing ratio 1:15
Exposure: 4 min
The cleaning of engine, vehicle underbody and gearbox is no longer a problem thanks to our cleaning agents and it is now done effortlessly. Dilute the cleaner Dimer or Falcom with water in the ratio 1:15. Then generously spray the engine or the gearbox and rinse with the high-pressure cleaner after a 4-minute.
Car underbody
Dimer Detergent
Mixing ratio 1:15
Exposure: 4 min
The cleaning of engine, vehicle underbody and gearbox is no longer a problem thanks to our cleaning agents and it is now done effortlessly. Dilute the cleaner Dimer or Falcom with water in the ratio 1:15. Then generously spray the engine or the gearbox and rinse with the high-pressure cleaner after a 4-minute.
Concrete
Dimer Detergent
Mixing ratio 1:15
Exposure: 3 min
Concrete walls and facades that are contaminated with oil, grease or soot can be effortlessly cleaned with our Dimer detergent. Dilute the cleaner in the ratio 1:15 with water. Spray the surface and after a contact time of 3 minutes, the surface can already be rinsed with water or wiped with a wet cloth.
Tiles & industrial floors
Dimer Detergent
Mixing ratio 1:20
Exposure: 5 min
On this example you can see the floor of a juice production. As you can see on the
previous picture, the fructose or apple and pear fruit acid has been burned into the tiles
here. Thanks to the detergent Dimer, no problem. Dilute the cleaner with water 1:10. The
tiles are now sprayed with the diluted cleaner Dimer. Afterwards, it is highly
recommended to clean the tiles or the floor with a brush if it is burned
in such a strong
way. Finally, the tiles or the floor are rinsed with water.
Für weiteres Bild- und Videomaterial, folgen Sie uns auf Facebook und Instagram.
English (UK) 
Deutsch